“888 KiB Assistant” but the assistant itself is a multi terabyte rental-only model stored in some mysterious data center.
I'm getting "serverless" flashbacks.
My model is at home... just 16Gb still a lot but just FYI
It seems to support connecting to your own LLM on the same LAN
The point is the agent is still the LLM.
No LLM, no agent.
I tried connecting OpenClaw to ollama with a V100 running qwen3.5:35b but it was really, really, really slow (despite ollama itself feeling fairly fast).
These "claw" agents really multiply the tokens used by an obscenely huge factor for the same request.
For people who don't get this: it's a Home Assistant type thing. You don't do inference on it, you send it a message on Telegram and it does things with physical things through GPIO. You could use a $140 Raspberry Pi with 8GB RAM and host a local model on it plugged into 30W AC power... or you could use a $10 ESP32 which can run for weeks on a tiny battery, and your existing Wifi connection with a cheap cloud model (cloud models are as cheap as $0.02/1MTokens). This makes it easier to ramp up on new ESP32 projects. You can just tell it to do things / give you info, rather than having to write code.
The model can be taken care of in cloud but hardware also depends upon what we want to do right? If we want to run some lightweight python scripts etc, we cant use ESP32 right?
Me: "GPIO 5 can be active for a maximum of 100ms, then it needs to cool down for at least 1s. Otherwise the MOSFET is fried."
Zclaw: "GPIO 5 is active now, however the server is not responding so I'm awaiting further instructions."
I fail to understand why 888 KiB matters if it's just a wrapper around a cloud api.
Have you seen OpenClaw's codebase? 680.000 LOC.
I care how big it is.
A lot of the *claws emphasize binary size and lines of code. I think for better or worse people treat codebase size as a proxy for "how much of the project is unsupervised, unmaintainable, buggy AI slop?"
8 is lucky number in China
Because of resource-constrained environments, the primary deployment target seem to be microcontrollers. You can get ESP32 boards for pretty cheap.
Because it means you can run it on an ESP32 which is a low power microprocessor package.
[deleted]
888KiB is quite large, but I see they're including the whole rest of the firmware in that number, fair enough. Their actual application code weighs only 35,742 bytes, compiled.
There are many concerns and areas for improvement with open claw and other similar projects (continuous loop script with broad OS access that manages your agents and interfaces with a standard messaging app)
However, file size I have never seen on that list. I would rather offer for something that is even bigger in file size so it afford certain functionality like better security tighter permissions however it would do that.
Everything runs in containers (I run it on a server along with everything else), plugins have a permission system so eg the AI can read emails but not delete or send, etc.
I really like it, I run it as my main agent and it has been extremely helpful.
Part of the usefulness is based on the same thing that makes it so dangerous.
If it can only read but not act, it’s safer but less useful.
I can't restrict OpenClaw if I don't need the extra capabilities. I can restrict this.
File size is a legit property to keep in mind if your goal is to create an agent that runs on ESP32 boards. They don't expect you to run Zclaw on Mac Mini.
What's the use case for running this on a tiny board? Isn't the whole point that it can use your computer for you?
[deleted]
For something like OpenClaw yes, but not for Zclaw. I think the naming is more about riding the current wave of Claw-related interest rather than positioning it as competition or replacement for other clawies.
Zclaw is about running an agent in your embedded system.
The examples seem to suggest it would be chatting with your home automation in natural language.
Before you know it your smart thermostat will be blogging. The joke is on everyone who thought IoT couldn't get any worse. Just imagine the new landscape of security vulnerabilities this opens up.
My "smart" gas stove can be turned on over the internet (if I allow it to connect)—perfect appliance to put an LLM in charge of.
Clicked on this expecting to see a crontab file.
Still lightyears from a one-bit AI assistant. Send 1 to save the humankind, 0 to exterminate. And hurry up because it's in undefined state right now!
[dead]
The domain crashed and burned or something, hopefully this link is correct:
There is the same divide starting to form that NFTs had back in the day. Tech bros instantly like if something has claw in the name, the rest of us will dismiss anything with that naming and philosophy as toxic slop culture. will be interesting to see how far this one will go.
“888 KiB Assistant” but the assistant itself is a multi terabyte rental-only model stored in some mysterious data center.
I'm getting "serverless" flashbacks.
My model is at home... just 16Gb still a lot but just FYI
It seems to support connecting to your own LLM on the same LAN
The point is the agent is still the LLM. No LLM, no agent.
I tried connecting OpenClaw to ollama with a V100 running qwen3.5:35b but it was really, really, really slow (despite ollama itself feeling fairly fast).
These "claw" agents really multiply the tokens used by an obscenely huge factor for the same request.
For people who don't get this: it's a Home Assistant type thing. You don't do inference on it, you send it a message on Telegram and it does things with physical things through GPIO. You could use a $140 Raspberry Pi with 8GB RAM and host a local model on it plugged into 30W AC power... or you could use a $10 ESP32 which can run for weeks on a tiny battery, and your existing Wifi connection with a cheap cloud model (cloud models are as cheap as $0.02/1MTokens). This makes it easier to ramp up on new ESP32 projects. You can just tell it to do things / give you info, rather than having to write code.
The model can be taken care of in cloud but hardware also depends upon what we want to do right? If we want to run some lightweight python scripts etc, we cant use ESP32 right?
Me: "GPIO 5 can be active for a maximum of 100ms, then it needs to cool down for at least 1s. Otherwise the MOSFET is fried."
Zclaw: "GPIO 5 is active now, however the server is not responding so I'm awaiting further instructions."
I fail to understand why 888 KiB matters if it's just a wrapper around a cloud api.
Have you seen OpenClaw's codebase? 680.000 LOC.
I care how big it is.
A lot of the *claws emphasize binary size and lines of code. I think for better or worse people treat codebase size as a proxy for "how much of the project is unsupervised, unmaintainable, buggy AI slop?"
8 is lucky number in China
Because of resource-constrained environments, the primary deployment target seem to be microcontrollers. You can get ESP32 boards for pretty cheap.
Because it means you can run it on an ESP32 which is a low power microprocessor package.
888KiB is quite large, but I see they're including the whole rest of the firmware in that number, fair enough. Their actual application code weighs only 35,742 bytes, compiled.
There are many concerns and areas for improvement with open claw and other similar projects (continuous loop script with broad OS access that manages your agents and interfaces with a standard messaging app)
However, file size I have never seen on that list. I would rather offer for something that is even bigger in file size so it afford certain functionality like better security tighter permissions however it would do that.
I made a secure one:
https://github.com/skorokithakis/stavrobot
Everything runs in containers (I run it on a server along with everything else), plugins have a permission system so eg the AI can read emails but not delete or send, etc.
I really like it, I run it as my main agent and it has been extremely helpful.
Part of the usefulness is based on the same thing that makes it so dangerous.
If it can only read but not act, it’s safer but less useful.
I can't restrict OpenClaw if I don't need the extra capabilities. I can restrict this.
File size is a legit property to keep in mind if your goal is to create an agent that runs on ESP32 boards. They don't expect you to run Zclaw on Mac Mini.
What's the use case for running this on a tiny board? Isn't the whole point that it can use your computer for you?
For something like OpenClaw yes, but not for Zclaw. I think the naming is more about riding the current wave of Claw-related interest rather than positioning it as competition or replacement for other clawies.
Zclaw is about running an agent in your embedded system.
The examples seem to suggest it would be chatting with your home automation in natural language.
Before you know it your smart thermostat will be blogging. The joke is on everyone who thought IoT couldn't get any worse. Just imagine the new landscape of security vulnerabilities this opens up.
My "smart" gas stove can be turned on over the internet (if I allow it to connect)—perfect appliance to put an LLM in charge of.
Clicked on this expecting to see a crontab file.
Still lightyears from a one-bit AI assistant. Send 1 to save the humankind, 0 to exterminate. And hurry up because it's in undefined state right now!
[dead]
The domain crashed and burned or something, hopefully this link is correct:
https://github.com/tnm/zclaw
There is the same divide starting to form that NFTs had back in the day. Tech bros instantly like if something has claw in the name, the rest of us will dismiss anything with that naming and philosophy as toxic slop culture. will be interesting to see how far this one will go.
Is Clawcoin a thing yet?
You know it.
https://phantom.com/tokens/solana/GzqSGShBevWmjSW3zwe8RmtUzb...
1. why
2. fun
2. hype